|
The hydraulic sleeves are provided with grooves for the oil injection, greatly facilitating the disassembly of the set(Bearing and hydraulic sleeve), especially after long time of using. The hydraulic sleeves have thin walls and, when mounted far from the face of the axle, they require a connection suitably small, so that the hydraulic pump can be connected correctly. To meet this need the BGL has extension tubes suitable for every possibility of oil entering into the sleeves, being M4, M6, M8, G1/8, G1/4 joined at the other end with thread ¼ BSP to be connected with the hose of the pump outlet. |
| A | Thread |
| B | Outside diameter of the tube |
| C | Total length |
| D | Thread length |
| E | Thread of the nipple |
| F | Dimension of the hex screw |
| L | Effective length of the tube |
| Code | A |
B mm |
C mm |
D mm |
E |
F mm |
Maximum Work Pressure Mpa |
L mm |
| TE M4 01 | M4x0.7 | 4 | 100 | 9 | 1/4 BSP | 25.4 | 175 | 61 |
| TE M6 01 | M6x1 | 6 | 98 | 12 | 1/4 BSP | 25.4 | 180 | 58 |
| TE M6 02 | M6x1 | 6 | 328 | 12 | 1/4 BSP | 25.4 | 180 | 288 |
| TE M8 01 | M8x1.25 | 8 | 325 | 15 | 1/4 BSP | 25.4 | 220 | 285 |
| TE 1/8BSP 01 | 1/8x28F BSP | 9.6 | 325 | 15 | 1/4 BSP | 25.4 | 250 | 285 |
| TE 1/4BSP 01 | 1/4x19F BSP | 13 | 422 | 18 | 1/4 BSP | 25.4 | 320 | 382 |
|
Didn't find the product you were looking for? We make special products under request, contact us. www.bgl.com.br info@bgl.com.br |
| This Catalog was made with the intention of avoiding any errors that could eventually happen. BGL reserves the right to change specifications when required without previous notice. |
Português
English | 
Español
Deutsch